7990
1598,- / L

Cylindrical Retaining Compound

Art. 36-32
Strong and quick-drying glue for mounting cylindrical components. Suitable for e.g. mounting bushings, bearings or washers on axles or housings. Enables full contact between the components which means that dynamic, axial and radial loads are optimally distributed. For cylindrical play up to 0, 25 mm. Temperature range -55 °C to +150 °C. 50 ml.

Instructions

Mounting
  • For best results, clean all surfaces (interior and exterior) with detergent and allow it to evaporate.
  • Apply the glue and press the parts together.
  • Wipe up any excess glue that may have seeped out. Thread sealant cures in the absence of oxygen.
  • If the curing process is slow, spray with a suitable activator and allow to dry.

    Removal
  • Heat the relevant area to 250 °C. Remove while hot.
Danger
Harmful to aquatic life with long lasting effects. May cause respiratory irritation. Causes serious eye damage. May cause an allergic skin reaction. Causes skin irritation.
Show safety phrases
The contents/container should be brought to a local household waste recycling site. Specific treatment (see … on this label). Call a POISON CENTER or doctor/physician if you feel unwell. Immediately call a POISON CENTER or doctor/physician. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Wear protective gloves/protective clothing/eye protection/face protection. Keep out of reach of children. If medical advice is needed, have product container or label at hand.

Related products