Winter Work Gloves 890
- Material, glove: Acrylic *Material, coating: Latex *Material, elastic: Polyester
This product is CE marked in accordance with the Personal Protective Equipment Directive, (EU) 2016/425. It conforms to the directive's requirements for safety, comfort and efficacy.
This product has been constructed and manufactured in accordance with the following standards: *EN 420:2003+A1:2009 – General requirements for protective gloves. *EN 388:2016 – Gloves for protection against mechanical hazards. *EN 511:2006 – Gloves for protection against cold temperatures. *The product complies with the restriction rules in Annex XVII of the European REACH regulations.
A more detailed description of the gloves' performance level is shown below.
EN 388:2016– Gloves for protection against mechanical hazards.
These gloves comply with EN 388, with a performance level according to the table.
|= Tested property |=Level, glove |=Max. level |Abrasion resistance a) |2 |4 |Cutting resistance b) |2 |5 |Tear resistance c) |4 |4 |Puncture resistance d) |2 |4|Cutting resistance in accordance with EN ISO13997 d)| X| F|
X indicates that the test method is not applicable to the design or material of the glove.|=Protection level |=1 |=2 |=3 |=4 |=5|Abrasion resistance a) |100 |500 |2000 |8000 |-|Cutting resistance b) |1.2 |2.5 |5.0 |10.0 |20,0|Tear resistance c) |10 |25 |50 |75 |-|Puncture Resistance d) |20 |60 |100 |150 |-a) Number of revolutions in sanding machine.
b) Resistance to rotating cutting blades (index).
c) Test sample torn in opposing directions (Newton).
d) Sharp bradawl pressed against the test sample (Newton).
EN 511:2006 - Gloves for protection against cold temperatures.
This glove meets the requirements for contact cooling according to EN 511:2006, with a performance level according to the table (X = untested property).
|=Tested property |=Level, glove |=Max. level|Convection cooling (I) |I ≤ 0.10 |0.10 ≤ I |0.15 ≤ I |0.22 ≤ I |0.30 ≤ I|Contact cooling |2 |4|Water penetration |X |1|=Protection level |=0 |=1 |=2 |=3 |=4|Convection cooling (I) | I 10 0.10 | 0.10 ≤ I | 0.15 ≤ I | 0.22 ≤ I | 0.30 ≤ I |Contact cooling (R) |R ≤ 0.025 |0.025 ≤ R |0.050 ≤ R |0.100 ≤ R |0.150 ≤ R|Water penetration |Penetration |No penetration | | | |
The glove protects against physical and mechanical stress and against cold. The protection levels are applicable to the palm of a new, unwashed and non-modified glove. Tested according to current standards.The glove must not:*come into contact with fire.*Be used when there is a risk of entanglement in moving machine parts.
Wet can degrade the insulating performance. The gloves should be stored at normal temperatures and humidity and in a clean, covered and well ventilated area. Damaged gloves do not provide protection and should be discarded.