Gas/Oil Sealing

Art. 36-41

Thread sealant for connections and couplings. Works equally well on HVAC connections as it does for gas and oil installations. Seals without clogging valves or pressure gauges. Comes in practical bottle for easy application. Withstands temperatures between -50 °C and +150 °C. Suitable for use in connections up to 75 mm. Does not crack or contract. Very high resistance to vibrations and impacts. Hardens in less than 15 minutes. 50 ml.

Instructions

Ensure that all parts are clean, dry and free of oil and grease. A better result is achieved with degreased parts.
Fill the connection with thread sealant by hand, directly from the bottle.
Assemble the parts.
Wipe up any excess sealant that may have seeped out. Thread sealant hardens in the absence of oxygen.
Allow the thread sealant to solidify for about 15 – 30 minutes, depending on the amount used.

NOTE! One can use an activator/primer but this may reduce the overall strength by 30 %.

Warning

Toxic to aquatic life with long lasting effects. May cause respiratory irritation. Causes serious eye irritation. May cause an allergic skin reaction. Causes skin irritation.

Show safety phrases

Dispose of contents/container to hazardous or special waste collection point. If eye irritation persists: Get medical advice/attention. If skin irritation occurs: Get medical advice/attention. Specific treatment (see … on this label). IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. IF ON SKIN: Wash with plenty of soap and water. Wear protective gloves/protective clothing/eye protection/face protection. Avoid release to the environment. Wash hands thoroughly after handling. Keep out of reach of children. If medical advice is needed, have product container or label at hand.